Arctic P12 Slim PWM PST Case Fan

599 (Inclusive of GST)

Brand:

Out of stock

Email when back in stock

Arctic P12 Slim PWM PST Case Fan:

Overview:

IDEAL WHERE SPACE IS LIMITED

Unlike normal case fans, which are 25 mm thick, the Arctic P12 Slim PWM PST  has an installation depth of only 15 mm. This makes it a predestined fan for small form factor builds.

OPTIMISED FOR STATIC PRESSURE

During the development of the new Arctic P12 Slim PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the Arctic P12 Slim PWM PST is particularly suitable for use on covered case vents or inlets with filters.

MORE EFFICIENT TECHNOLOGY

The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new Arctic P12 Slim PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

MAXIMUM QUIETNESS, MINIMUM VIBRATION

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.

Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

EXTENDED LIFE SPAN

A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.

Consequently, we have extended the warranty to 10 years.

300 TO 2100 RPM REGULATED VIA PWM PST

With a wide range of regulation and the PWM Sharing Technology (PST), the P12 Slim PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

HIGH QUALITY BEARING

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

TWO WAY INSTALLATION

Push warm air out of the case
Pull cool air into your case

Specifications:

General Specifications:

Fan Speed300–2100 rpm (Controlled by PWM)
Airflow71.53 m³/h 41.1 cfm
Static Pressure1.45 mm/H2O
Noise Level0.3 Sone
RPM-ControllPWM
Fan BearingFluid Dynamic Bearing
Connector4 Pin Connector + 4 Pin Socket
Net Weight85 g
Dimensions120 (L) x 120 (W) x 15 (H) mm
Warranty10 years

Electrical Specifications:

Typical Voltage12 V
Start Up Voltage 4 V
Current0.12 A
Cable Length400 mm + 80 mm
Box Dimensions 123 (L) x 127 (W) x 16 (H) mm
Gross Weight110 g

Additional information

Weight1 kg
EAN/UPC

4895213703130

Brand

Arctic

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: