Arctic Freezer 50 ARGB with Controller CPU Air Cooler:
Overview:
RAM CLEARANCE
Since the ARCTIC Freezer 50 ARGB is built for maximum performance, including a massive heatsink, it does not have limitless RAM Clearance. Recommended is a maximum memory module height of 37.5 mm. This stipulation is mainly due to the tip on the underside of the Arctic Freezer 50 ARGB, which means modules that exceed this height could still be compatible if they have V-shaped or centrally recessed heatsinks.
A-RGB FOR FULL COLOUR CONTROL
DUAL TOWER DESIGN AND 6 HEATPIPES
This enables the highest possible cooling performance and makes the Arctic Freezer 50 ARGB to one of the strongest air cooler ARCTIC ever made.IDEAL AIRFLOW
The Arctic Freezer 50 ARGB features two P-fans working in push-pull-configuration. Combining a 120 mm and a 140 mm fan leads to an increase in airflow for improved cooling, while keeping the noise level and the installation height down.
P-FAN FOR INCREASED PERFORMANCE
* PWM for synchronous fan control
FULL FLEDGED A-RGB CONTROLLER (OPTIONAL)
* The A-RGB controller is optional. If you want to purchase the Freezer 50 with A-RGB controller, make sure you choose the version “Freezer 50 incl. A-RGB Controller”. Further information about the controller can be found here.
EASY INSTALLATION & SECURE HOLD
Specifications:
General Specifications
Compatibillity | Intel® 1200, 115X, 2066, 2011(-3) AMD® AM4 |
Heatsink | Dual Tower Aluminum Heatsink |
Fan | 1 x 120 mm & 1 x 140 mm PWM-Fan |
TIM | ARCTIC MX-4 included |
Noise Level | 0.4 Sone @ Max. rpm |
Dimensions | 148 mm (L) x 149.5 mm (W) x 166 mm (H) |
Weight | 1160 g |
Addressable RGB Controller (Optional*)
Outputs | 3-Pin 5V-DI-GND Connector 2x A-RGB Fan 8-Pin |
Software Requirement | No |
RGB Modes | 15 embedded Modes 12 embedded Colours + Motherboard sync |
Accessories | RF Remote 400 mm Motherboard Sync Cable Mounting Accessories |
Power Source | Sata Power |
Dimensions | 100 mm (L) x 70 mm (W) x 12 mm (H) |
Weight | 50 g |
Heatsink Specifications
Heat Pipe | Direct Touch, Ø 6 mm x 6 |
Number of Fins | 2 x 52 |
Fin Thickness | 0.4 mm |
Fin Material | Aluminum |
Fan Specifications
Speed | 1x 120 mm, 200 – 1800 rpm 1x 140 mm, 200 – 1700 rpm |
RPM | Control Pulse Wide Modulation |
Connector | 120 mm fan: 4-Pin Connector 140 mm fan: 4-Pin Connector + 4-Pin Socket |
Bearing | Fluid Dynamic Bearing |
Current/Voltage | 120 mm: 0.09 A/12 V 140 mm: 0.13 A/12 V |
LEDs | 13 A-RGB LEDs |
Connector | 3-Pin 5V-DI-GND Connector |
Current/Voltage | 0.5 A / 5 V |