Arctic Freezer i13 X CO CPU Air Cooler

2,349 (Inclusive of GST)

Available Models: FREEZER-i13-X-CO
Brand:

Out of stock

Email when back in stock

Arctic Freezer i13 X CO CPU Air Cooler :

The Arctic Freezer i13 X CO is a compact CPU cooler with one 100 mm fan. It benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC was been able to significantly improve the Arctic Freezer i13 X CO cooling performance. With the use of a double ball bearing it is designed for continuous operation and is therefore also suitable for 24/7 operations. It is supplied with pre-applied ARCTIC MX-2 thermal compound and has a simple assembly system.

Features:

• Secure hold with backplate
• Pre-applied MX-2 thermal paste
• Extended lifespan thanks to low motor temperature
• Lower power consumption and less vibration with new motor technology
• Offset heat pipes ensure optimal heat dissipation
• Focused airstream for improved cooling performance

Overview:

SMALL FOOTPRINT FOR OPTIMAL COMPATIBILLITY

The Arctic Freezer i13 X CO combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X CO has an installation height of only 137 mm and there are no limitations in RAM compatibility.

PRE-APPLIED MX-2 THERMAL PASTE

Pre-applied, high-performing  MX-2 thermal paste ensures quick and clean assembly.

LONGER LIFESPAN THANKS TO ITS LOW MOTOR TEMPERATURE

The Arctic Freezer i13 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing  ARCTIC to grant a 6-year warranty period for the Arctic Freezer i13 X CO.

OFFSET HEAT PIPES ENABLE OPTIMAL HEAT DISSIPATION

The direct touch heat pipes attached to the Arctic Freezer i13 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

P-FAN FOR INCREASED PERFORMANCE

Inspired by the P-series, the Arctic Freezer i13 X CO fan benefits from all of the advantages of P-fans:

  • High static pressure for increased cooling performance
  • Broad RPM range
  • Lower power consumption
  • Less vibration
  • PWM for synchronous fan control

For additional information about the P-fans

DOUBLE BALL BEARING FOR CONTINOUS OPERATION

The premium quality Japanese dual ball bearing allows con­tinuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.

DIRECT TOUCH HEAT PIPES

The Arctic Freezer i13 X CO uses direct touch heat pipes. This ensures that the heat to be dissipated is transferred directly to the heat pipes without an additional material layer, and transported into the heatsink via the pipes.

MORE COOLING CAPACITY WITH FREEZER I13 X CO

The Arctic Freezer i13 X CO sets new standards in cooling. Proven to outperform its predecessor in cooling capacity.

MORE EFFICIENT AND WHISPER QUIET

In addition to operating more quietly, even at maximum speed, the Freezer i13 X CO’s built-in fan motor is also much more efficient.
The power consumption was reduced from 0.18 A to 0.07 A, which corresponds to an effective saving of 60 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer i13 X CO to run at a whisper-quiet 0.3 sone when at maximum speed.

MULTILINGUAL MANUALS

ARCTIC installation manuals come in a variety of languages. They are regularly updated and easy to access from anywhere in the world. For step-by-step installation videos

Specifications:

Heat PipeDirect Touch Ø 6 mm x 3
HeatsinkAluminium Fins x 44 Thickness: 0.4 mm
Thermal CompoundMX-2 pre-applied
Dimensions85.5 (L) x 112 (W) x 137 (H) mm
Weight425 g
CompatibilityIntel® 1200, 115x

 

RAM Clearanceno limit
Fan1 x 100 mm, 300–2000 RPM (Controlled by PWM)
Current/Voltage0.07 A/12 V
BearingsDouble Ball Bearing
Noise Level0.3 Sone
Connector4-pin connector

Additional information

Weight3 kg
Brand

Arctic

Available Models

FREEZER-i13-X-CO

Color

Black

Type

CPU Air Cooler

EAN/UPC

4895213702553

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: